Measurements
R&S
®
FSW
146User Manual 1173.9411.02 ─ 19
Fig. 5-24: MSR signal structure
Sub block and channel definition
The sub blocks are defined by a specified center frequency, RF bandwidth, and num-
ber of transmit channels.
Fig. 5-25: Sub block definition
As opposed to common ACLR channel definitions, the Tx channels are defined at
absolute frequencies, rather than by a spacing relative to the (common) center fre-
quency. Each transmit channel can be assigned a different technology, used to prede-
fine the required bandwidth.
Channel Power and Adjacent-Channel Power (ACLR) Measurement
To Next Page
Loading...
