General Instrument Setup
R&S
®
FSW
581User Manual 1173.9411.02 ─ 19
Before updating the firmware on your instrument, read the release notes delivered with
the firmware version.
As of firmware version 1.60, administrator rights are no longer required to perform a
firmware update.
Installing options in secure user mode
Be sure to perform any firmware updates before Secure User Mode is enabled; see
chapter 3.1.7, "Protecting Data Using the Secure User Mode", on page 37.
For restricted users in secure user mode, this function is not available!
The firmware can be updated in the "Firmware Update" tab of the "System Configura-
tion" dialog box.
Enter the name or browse for the firmware installation file and press the "Install" but-
ton.
9.3.4.5 General Configuration Settings
General system settings, for example concerning the initial behaviour of the R&S FSW
after booting, are configured in the "Config" tab of the "System Configuration" dialog
box.
General Instrument Settings
To Next Page
Loading...
