Signal Control and Signal Characteristics
R&S
®
SMW-K144
143User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:OUTPut:POWer:MODE on page 260
Reference System Bandwidth
In "Power Mode > Constant PSD", sets the system bandwidth used as reference for
the calculation of the output power.
Remote command:
[:SOURce<hw>]:BB:NR5G:OUTPut:POWer:RSBW on page 260
Adjusting the Signal Power
To Next Page
Loading...