Rohde & Schwarz SMW-K144 - Page 214

Remote-Control Commands
R&S
®
SMW-K144
214User Manual 1178.8013.02 ─ 06
Parameters:
<RestrToSSpace> 0 | 1 | OFF | ON
*RST: 0
Example: See Example "Search space configuration" on page 156.
Manual operation: See "Restrict to Search Space" on page 29
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:CONTent <Content>
Sets the allocated channel or signal.
Parameters:
<Content> COReset | PDSCh | PUSCh | PRACh | PUCCh
*RST: PSS
Example: See Example "Configuring the configurable allocations in the
users and BWPs groups" on page 152.
Manual operation: See "Content" on page 83
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:NALLoc <NumUserAlloc>
Sets the number of configurable allocations in the selected
USER<dir0>:BWPart<gr0> group.
Parameters:
<NumUserAlloc> integer
Range: 0 to 64
*RST: 0
Example: See Example "Configuring the configurable allocations in the
users and BWPs groups" on page 152.
Manual operation: See "No. of Allocations" on page 83
[:SOURce<hw>]:BB:NR5G:SCHed:CELL<ch0>:SUBF<st0>:USER<dir0>:
BWPart<gr0>:ALLoc<user0>:SLOT <Slot>
Sets the start slot for the selected allocation.
Parameters:
<Slot> integer
Range: 0 to 31
*RST: 0
Example: See Example "Configuring the configurable allocations in the
users and BWPs groups" on page 152.
Manual operation: See "Slot" on page 83
Scheduling Commands