Roland LEC-540 User Manual

Chapter 5
Part of Practice
Fully Utilizing Preset Function ....................................................122
Saving the Various Settings to the Preset ...............................122
Loading a Saved Preset ..........................................................123
Assigning a Name to a Preset .................................................123
Fully Utilizing the Correction Function .......................................125
Correcting for Misalignment in Bidirectional Printing ...............125
Correcting for Misalignment in Bidirectional Printing More Precisely .. 126
Alleviating Horizontal Bands and the Like (feed correction function) .. 126
Accommodating to the Types and Condition of Media ............... 128
Adjusting Head Height to Match Media Thickness ..................128
Using Transparent Media ........................................................129
Using the Media Easy to be Winkled / Hard to be Fed ............129
Speeding Up Output for Narrow Media ...................................130
Preventing Soiling of the Media and Dot Drop-out ..................132
Fully Utilizing Cutting Function ...................................................133
Hints and Tips for Cutting Setting ............................................133
Preventing Pulling of the Media with Undue Force When Performing Cutting Only ... 133
Fine-tuning the Cutting Conditions ..........................................134
Accurately Adjusting the Cutting-in Amount.............................136
Adjusting the Conditions for Cutting the Printed Surface/Cutting-in Amount .. 136
Performing Distance Correction During Cutting ......................139
Correcting Misalignment of the Printing and Cutting Positions 140
Prioritize the Cutting Settings of This Machine to the Settings of the Software RIP ... 142
Viewing the Automatic Environment Correction Function Settings .... 143
Performing Printing and Cutting Separately...............................144
To Perform Printing and Cutting Separately ............................144
Printing with Crop Marks .........................................................144
Aligning Automatically and Cutting ..........................................146
Aligning Manually and Cutting .................................................148
Correcting Misalignment for Printing and Cutting When Using Crop Marks.... 149
Switching the Ink Type ...............................................................152
Restrictions on Switching Ink Type ..........................................152
Method for Switching the Ink Type ..........................................153
121

Roland LEC-540 Specifications

General

Brand	Roland
Model	LEC-540
Category	Printer
Language	English