Roland LEC-540 User Manual

189
8
Main Specications
About the Blade
The cutting conditions and the service life of the blade change according to the media and the operating
environment, even when you're using identical blades. The service life also diers according to the type of
blade. A rough guide is shown below.
Blade
Media Blade force
Amount of blade
oset
Blade life*
(general guide)
ZEC-U1005 General signage vinyl 50 to 150 gf 0.25 mm 8000 m
ZEC-U5025 General signage vinyl 30 to 100 gf 0.25 mm 4000 m
Fluorescent vinyl 120 to 200 gf 0.25 mm 4000 m
Reective vinyl 100 to 200 gf 0.25 mm 4000 m
When uncut areas remain even when the blade force is increased to a value that is higher by 50 to 60 gf than
the values shown in this chart, then replace the blade.
*The values for "Blade life" are estimates for when an identical type of media is used.

Roland LEC-540 Specifications

General

Brand	Roland
Model	LEC-540
Category	Printer
Language	English