Fully Utilizing the Correction Function
5
Part of
Practice
127
Description
The movement distance of media experiences subtle changes due to the thickness of the media . When the
movement distance becomes discrepant, horizontal stripes are more likely to occur during printing. We recom-
mend performing correction to match the media you're using. Repeat the process of printing a test pattern
and entering a correction value several times to nd the optimal value.
You can also make this setting on the RIP software computer (by, for example, choosing the media type in the
software RIP you are using). When you have made the setting on the software RIP, the software RIP's setting
is used and the printer's setting is ignored.
Default Setting
[SETTING]: 0.00%
To Next Page
Loading...
Need help?
General