Roland LEC-540 User Manual

2
Basic Operation
Loading Media
53
Performing the Initial Adjustment (Correcting for Misalignment in Bidirectional Printing More Precisely)
Perform the initial adjustment (correction for misalignment in bidirectional printing more precisely) of this
machine. This adjustment is necessary in the following cases. If the thickness of the media is over 0.5mm, raise
the head height before performing this adjustment.
 P. 128, "Adjusting Head Height to Match Media Thickness"
 When using this machine for the rst time
 When changing the media to use
 When further correction is required to improve printing, such as when simple correction is
performed for misalignment in bidirectional printing. P. 125, "Correcting for Misalignment
in Bidirectional Printing"
Procedure

Press .

Press several times until the screen shown on
the left appears.
Press
and then .

Press .

Press .
A test pattern is printed.
When printing ends, then press .

Press .
Continued on the next page
MENU
ADJUST BI-DIR
ADJUST BI-DIR
DETAIL SETTING
DETAIL SETING
TEST PRINT
DETAIL SETTING
SETTING NO.1

Roland LEC-540 Specifications

General

Brand	Roland
Model	LEC-540
Category	Printer
Language	English