Roland LEC-540 - About the Blade

Printing/Cutting Area
8
Main Specications
187
Maximum Area When Using Crop Marks
When crop marks are used, the printing or cutting area is reduced from the maximum area by an amount
equal to the crop marks.
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
Printing or cutting area
Maximum area
Crop mark
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)
12.5 mm
(0.5 in.)
10 mm
(0.4 in.)