Roland LEC-540 User Manual

Output Operation Management
6
To Administrators
160
Making Sure to Verify the Setting for the Amount Remaining Every Time the Media Is Changed
Set to display
SET LENGTH
0.0 m
25.0 m
every time when a media is changed.
Procedure

Press .

Press several times to display the left gure.
Press
, and then .

Press .

Press to select "ENABLE".
Press
to enable the setting.
If you set to "ENABLE," you must set the [EDGE DETECTION] menu
to "ENABLE."
 P. 129, "Using Transparent Media"

Press in this order to go back to the
original screen.
Description
Setting this menu to "ENABLE" can keep you from forgetting to redo the setting when you change the media.
Be sure, however, also to set the [EDGE DETECTION] menu (refer to P. 129, "Using Transparent Media") to "EN-
ABLE." When [EDGE DETECTION] is set to "DISABLE," [SHEET REMAIN] is not displayed automatically.
Default Setting
[AUTO DISPLAY]: DISABLE
MENU
SHEET REMAIN
SHHET REMAIN
AUTO DISPLAY
AUTO DISPLAY
DISABLE
ENABLE
W 736mm
SETUP SHEET
ROLL

Roland LEC-540 Specifications

General

Brand	Roland
Model	LEC-540
Category	Printer
Language	English