Roland LEC-540 - Fully Utilizing Cutting Function; Preventing Media Pulling During Cutting

Accommodating to the Types and Condition of Media
5
Part of Practice
131

Press to select an item.
SHEET
"SHEET" matches the range of head movement to the width of the
media.
OFF
OFF" matches the range of head movement to the output data. Move-
ment is limited to the minimum amount necessary, and this can be
expected to yield the fastest output. Note, however, that because
the speed of media movement is no longer constant, colors may be
uneven.
FULL
This makes the speed of media movement constant at all times and
produces the most stable printing result.
Press to enable the setting.

Press in this order to go back to the
original screen.
Description
This shortens output time by reducing the width of print head movement to the minimum necessary. This is
eective when the width of the media or the output data is narrow.
Default Setting
[FULL WIDTH S]: FULL
FULL WIDTH S
FULL
OFF
W 736mm
SETUP SHEET
ROLL
Print-end position
Feed direction
Scan direction
Next print-start position
Print-start position
Printing area
Print-head movement
range
Range of print-head movement when set to "OFF"