Roland LEC-540 - Part Names and Functions

Contents
4
Company names and product names are trademarks or registered trademarks of their respective holders.
Copyright © 2010-2012 Roland DG Corporation http://www.rolanddg.com/
Media Feed is Not Smooth ........................................................................ 175
Media Wrinkles or Shrinks ........................................................................................................ 175
Media Feed Is Not Straight ....................................................................................................... 175
Media Feed Is Not Smooth ....................................................................................................... 175
The Print Heads Stopped Moving .............................................................177
What to Do First ........................................................................................................................... 177
If the Heads Still Do Not Move ................................................................................................ 177
A Message Appears ..................................................................................180
An Error Message Appears .......................................................................182
Chapter 8 Main Specications ........................................................................ 185
Printing/Cutting Area .................................................................................186
Maximum Area ............................................................................................................................. 186
Maximum Area When Using Crop Marks ............................................................................ 187
Media-cuto Location During Continuous Printing ....................................................... 188
About the Blade ......................................................................................... 189
Locations of the Power Rating and Serial Number Labels ........................190
Specications ............................................................................................191