Roland M-5000 - Page 85

Changing the Number of Input Channels/Output Buses
85
MATRIX
Value input area
NUMBER NAME
MATRIX INPUTS
Sets the number of input channels/output buses
sent to MATRIX.
NUMBER MATRIX number
NAME
MATRIX name
* When no specic name exists, a name
corresponding to the MATRIX number
(MTX xx) is automatically assigned.
Value input area Enter the number of MATRIXes you want to add.
ADD
Increases the quantity of MATRIXes by the
number entered in the value input area.
Memo
You can select multiple channels for moving or deleting.
0“Selecting and Moving Multiple List Items” (p. 69)
0“Selecting and Deleting Multiple List Items” (p. 70)
MONITOR
NONE No monitors are used.
STEREO
Stereo
* Two audio paths are used.
LCR
LCR (stereo + center)
* Three audio paths are used.
5.1
5.1-channel surround
* Six audio paths are used.
COMM
NONE No talkback or talkback return is used.
TB
Uses talkback.
* One audio path is used.
TB RTN
Uses talkback return.
* One audio path is used.