Roland VR-6HD

127
Menu List
8: MEMORY/MACRO/SEQ
SCENE MEMORY
Menu item
Value (bold text: default
value)
Explanation
START UP
Species the settings loaded at startup.
LAST MEMORY
Restores the state that was in eect immediately before the power was turned o (Last Memory
feature).
The current settings (Last Memory values) are saved every 4 seconds, and when you exit a menu.
1: MEMORY 1–
32: MEMORY 32 (*1)
Recall the settings at the selected scene memory.
PRIORITY MEMORY, PANEL Sets whether to give the scene memory or the panel state priority.
MEMORY PROTECT OFF, ON
When this is “ON”, prohibits settings from being saved or initialized. This protects the scene
memories.
* Protected scene memories are erased if you perform a factory reset.
LOAD FROM STORAGE
ENTER
Shows a list of scene memory setting les on the storage media.
You can select a scene memory setting le to recall a scene memory (1–32) on this unit.
SAVE TO STORAGE
ENTER
Shows a list of scene memory setting les on the storage media.
You can select a scene memory setting le to save a scene memory (1–32) to the storage media.
BUTTON ASSIGN ENTER This shows the BUTTON ASSIGN menu.
VIDEO SWITCHER BUTTON
1–6
1: MEMORY 1–
32: MEMORY 32 (*1)
The default values are as
follows.
1: MEMORY 1
2: MEMORY 2
3: MEMORY 3
4: MEMORY 4
5: MEMORY 5
6: MEMORY 6
Selects the scene memories that are assigned to the VIDEO SWITCHER buttons.
FADE TIME 0.0–4.0sec
Sets how long the transition to the next video takes when recalling a scene memory.
* The time you set is used for the parameters below.
MIX/WIPE OFF, ON When this is “ON”, the transition eect is applied when the scene memory is recalled.
PinP & KEY 1–2 OFF, ON
When this is “ON”, the inset screen fades in when you recall a scene memory that includes a PinP
composite.
DSK OFF, ON
When this is “ON”, the superimposed caption and video fades in when you recall a scene memory
that includes a DSK composite.
LOAD PARAMETERS
Species whether to recall the following items when recalling a scene memory.
Items that are turned o are excluded from the preset memories that are recalled.
VIDEO ASSIGN OFF, ON VIDEO ASSIGN menu
VIDEO INPUT OFF, ON VIDEO INPUT menu
VIDEO OUTPUT OFF, ON VIDEO OUTPUT menu
TRANSITION TRANSITION settings
TRANSITION TYPE OFF, ON TRANSITION menu
MIX OFF, ON MIX menu
WIPE OFF, ON WIPE menu
SPLIT OFF, ON SPLIT menu
PinP & KEY PinP & KEY settings
PinP & KEY 1 OFF, ON PinP & KEY 1 menu
PinP & KEY 2 OFF, ON PinP & KEY 2 menu
DSK DSK settings
DSK OFF, ON DSK menu
VIDEO SWITCHER
BUTTON
OFF, ON VIDEO SWITCHER button state
AUDIO FADER ASSIGN OFF, ON AUDIO FADER ASSIGN menu
AUDIO INPUT OFF, ON AUDIO INPUT menu
AUDIO OUTPUT OFF, ON AUDIO OUTPUT menu
AUDIO FOLLOW OFF, ON AUDIO FOLLOW menu
AUDIO AUTO MIXING OFF, ON AUDIO AUTO MIXING menu
(*1) If you edited a scene memory’s name using “NAME EDIT”, the edited name is shown.