Roland VR-6HD

136
Menu List
12: NETWORK
Menu item
Value (bold text: default
value)
Explanation
NETWORK INFORMATION
ENTER Displays the following information.
Item Explanation
CONNECTION Connection status
IP ADDRESS IP address
SUBNET MASK Subnet mask.
DEFAULT GATEWAY Default gateway
DNS SERVER DNS server
PRIORITY LAN, TETHERING
Sets whether to prioritize the LAN connection or your smartphone tethering when
streaming.
CONFIGURE
Selects how settings are made for the IP address, subnet mask, and default gateway.
MANUAL This is to be congured manually.
USING DHCP
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
IP ADDRESS (*1) –––.–––.–––.–––
Species the IP address as appropriate for the network to which the unit is connected.
SUBNET MASK (*1) –––.–––.–––.––– Species the subnet mask as appropriate for the network to which the unit is connected.
DEFAULT GATEWAY (*1) –––.–––.–––.––– Species the default gateway as appropriate for the network to which the unit is connected.
DNS SERVER (*1) –––.–––.–––.–––
Species the DNS server address as appropriate for the network to which the unit is
connected.
TETHERING START, STOP Starts/stops tethering with your smartphone.
2D CODE FOR SMART TALLY ENTER
QR code for accessing the Smart Tally settings screen (Web)
* Note that the QR code is not shown if the VR-6HD is disconnected from the network.
NETWORK PASSWORD ENTER
Displays the NETWORK PASSWORD screen.
Set the necessary password for network connection, using four characters.
Show password
Password not set – – – –
Password set
* Input the password that’s set here when connecting a computer or other device on the same network
to access the VR-6HD.
MAC ADDRESS
––:––:––:––:––:––
Shows the MAC address of the VR-6HD.
(*1) This can be set if “CONFIGURE” is “MANUAL”.
13: SD CARD/USB MEMORY
Menu item
Value (bold text: default
value)
Explanation
SD CARD These are the SD card-related parameters.
EJECT
EXEC Safely ejects and allows you to remove the SD card.
FORMAT
EXEC Formats the SD card.
SPEED TEST
EXEC Measures the data write speed to the SD card.
USB MEMORY These are the USB ash drive-related parameters.
EJECT
EXEC Safely ejects and allows you to remove the USB ash drive.
FORMAT
EXEC Formats the USB ash drive.
SPEED TEST
EXEC Measures the data write speed to the USB ash drive.
RESTORE ALL SETTINGS
ENTER
Shows a list of the setting les (.VR6) that are on the USB ash drive.
You can select a setting le and restore the settings into the unit. The current settings are
overwritten.
BACKUP ALL SETTINGS
ENTER
Shows a list of the setting les (.VR6) that are on the USB ash drive.
You can select the settings le used to back up the current settings to the USB ash drive.
* Some settings are not saved to the le, such as the “TEST PATTERN” and “TEST TONE” settings in the
SYSTEM menu.