Roland VR-6HD

87
Other Functions
Recalling a Preset
This shows you how to recall the presets registered in your camera. You can also recall presets from multiple cameras at the same time.
1. In step 3 of “Registering Camera Settings in a Preset”
(p. 86), bring up the camera control screen.
Recalling presets from a single camera
Menu item Explanation
CAMERA ID
Select the camera from which you want to
recall a preset.
ALL CAMERAS LOAD Choose “OFF”.
Recalling from all cameras simultaneously
Menu item Explanation
ALL CAMERAS LOAD Choose “ON”.
2. Touch the preset number (CAMERA PRESET 1–6) area you
want to recall.
* If you decide to cancel, press the [EXIT] button.
3. Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The settings are recalled from the cameras.
4. Press the [MENU] button to close the menu.
Recalling presets with the buttons
By assigning the camera control function to a USER button on the
dashboard, you can recall presets using the buttons.
To use the camera control function, you must assign the camera control
function to a USER button on the dashboard.
Assigning a USER button
1. Assign the “CAMERA CONTROL” function to a USER button
by following the steps in “Using the dashboard” (p. 84).
Recalling a preset
2. On the camera control screen, set “ALL CAMERAS LOAD” to
“ON” (all cameras) or “OFF” (a single camera).
3. Press the USER button to which you’ve assigned the camera
control function to turn camera control on.
* This example shows the function assigned to USER button 1.
4. Use the [VALUE] knob to change the value to “CAMERA ID”,
and select the camera (1–6) from which to recall the presets.
5. Press the VIDEO SWITCHER button for the preset number
whose setting you want to recall.
The settings are recalled from the cameras.
6. To turn camera control o, press the USER button on the
dashboard once more.