Roland VR-6HD

59
Live Streaming
Livestreaming via YouTube Live
Getting ready
à Create a Google account beforehand.
à Make sure that the VR-6HD is connected to the Internet for
livestreaming.
à To record audio/video, set AUDIO REC and VIDEO REC to “ON” (p.
58).
Operating this unit
1. On the streaming/recording setup screen, touch either
<SERVICE 1> or <SERVICE 2> and select “YouTube Live”.
2. Touch <USE WEB APPLICATION>.
The shortened URL and QR code for the Web app are shown.
Operating your computer or smartphone
3. On the Web browser of your computer or smartphone, open
the link that’s shown.
4. Select your Google account.
5. Set the following parameters.
Item Explanation
Title Input the title of the livestream.
Description
Input the description to be shown on YouTube
Live for your content.
Select privacy
scope
Selects the privacy settings (the scope of release)
for the livestream.
Public
Anyone can search for and view the
content.
Unlisted
The content can be accessed only
via the link.
Private The livestream is only visible to you.
Select latency
Preference
Selects the latency setting.
Normal Normal latency
Low Low latency
UltraLow Ultra-low latency
6. Click “CREATE BROADCAST AND GET STREAM KEY”.
7. Click “SEND TO DEVICE”.
When the data transmission is nished, the message “Success”
appears.
The URL and STREAM KEY are applied to the VR-6HD.
NOTE
Don’t close the QR code screen until the “URL” and “STREAM
KEY” have been applied.
8. Click “OK”.
9. Close the page.
Operating this unit
10. Select the streaming/video recording screen.
The parameters for stopping/starting the livestream, audio and video
recording are shown in the status area.
11. Touch <ON AIR>.
The message “ARE YOU SURE YOU WANT TO START STREAMING?” is
shown.
12. Touch <OK>.
Livestreaming starts.
If audio/video recording is turned on, the audio/video starts at the
same time as the livestream.
13. Touch <ON AIR> once more to stop streaming.
The message “ARE YOU SURE YOU WANT TO STOP STREAMING?” is
shown.
14. Touch <OK>.
The livestream ends.
NOTE
¹ Stream keys that are acquired have an expiration date, so they
need to be acquired prior to livestreaming.
¹ When acquiring the stream key, you can select a livestream for
which the schedule has already been set by using “SELECT YOUR
BROADCAST”.
MEMO
You can also assign streaming start/stop to the USER buttons on the
dashboard.
From “LCD ASSIGN A” or “LCD ASSIGN B” on the dashboard screen
Ó
“USER BUTTON 1/2 or 3/4”, select “STREAM/RECORD” for CATEGORY
and “START/STOP” for VALUE.