Roland VR-6HD

129
Menu List
9: STILL IMAGE
Menu item
Value (bold text:
default value)
Explanation
LOAD FROM STORAGE This loads a still image from the storage media.
STILL IMAGE
STILL 1–16
Species where to save still images imported from a storage to this unit’s internal memory.
LOAD
ENTER
Shows a list of still image les on the storage media.
Select still images in the list to load them from the storage media.
Formats supported for loading
Format
Bitmap le (.bmp), 24-bit color, uncompressed
PNG le (.png), 24-bit color
* Alpha channel supported
JPEG le (.jpg), 24-bit color
Resolution
In conformity with system format
File name
No more than 64 single-byte alphanumeric characters
* The extension “.bmp”, “.png”, “.jpg”, or “.jpeg” must be added.
SAVE TO STORAGE This exports a still image to storage media.
STILL IMAGE
STILL 1–16
Selects the still images to export to the USB ash drive.
Press the [VALUE] knob to display a list of still images stored on the storage media (in the “Still”
subdirectory).
* The le formats of the still images that can be saved are the same as in “Formats supported for loading”,
above.
* You can’t export still images that were created while “HDCP” in the SYSTEM menu was “ON”.
SAVE
ENTER
Shows a list of still image les on the storage media.
Select still images in the list to export them to the storage media.
SAVE TO INTERNAL STORAGE ENABLE, DISABLE
You can set the method of saving still images to “temporarily save”. When you turn o the
power while the status is “DISABLE”, the captured still image is deleted.
DELETE STILL IMAGE EXEC Delete the selected still image.
DELETE ALL STILL IMAGE
EXEC Delete all still images.