Roland VR-6HD

61
Live Streaming
Livestreaming via Twitch
Getting ready
à Create a Twitch account beforehand.
à Make sure that the VR-6HD is connected to the Internet for
livestreaming.
à To record audio/video, set AUDIO REC and VIDEO REC to “ON” (p.
58).
Operating this unit
1. On the streaming/recording setup screen, touch either
<SERVICE 1> or <SERVICE 2> and select “Twitch”.
2. Touch <USE WEB APPLICATION>.
The shortened URL and QR code for the Web app are shown.
Operating your computer or smartphone
3. On the Web browser of your computer or smartphone, open
the link that’s shown.
4. Log in to your Twitch account.
5. Select the server to connect to in “Select ingest server
location”.
To stream your content in a more stable network environment, select
a server in a region that’s close to you.
* You can still livestream, regardless of which server you choose.
6. Click “SUBMIT TO DEVICE!”.
When the data transmission is nished, the message “Success”
appears.
The URL and STREAM KEY are applied to the VR-6HD.
NOTE
Don’t close the QR code screen until the “URL” and “STREAM
KEY” have been applied.
7. Click “OK”.
8. Close the page.
Operating this unit
9. Select the streaming/video recording screen.
The parameters for stopping/starting the livestream, audio and video
recording are shown in the status area.
10. Touch <ON AIR>.
The message “ARE YOU SURE YOU WANT TO START STREAMING?” is
shown.
11. Touch <OK>.
Livestreaming starts.
If audio/video recording is turned on, the audio/video starts at the
same time as the livestream.
12. Touch <ON AIR> once more to stop streaming.
The message “ARE YOU SURE YOU WANT TO STOP STREAMING?” is
shown.
13. Touch <OK>.
The livestream ends.
MEMO
You can also assign streaming start/stop to the USER buttons on the
dashboard.
From “LCD ASSIGN A” or “LCD ASSIGN B” on the dashboard screen
Ó
“USER BUTTON 1/2 or 3/4”, select “STREAM/RECORD” for CATEGORY
and “START/STOP” for VALUE.