Roland VR-6HD

45
Audio Operations
Using an Eect Preset
The VR-6HD is equipped with eects that are adjusted for specic
environments. These are called “eect presets”.
The eect presets are created using a combination of four eects (high-
pass lter, compressor, equalizer, noise gate).
Simply by selecting an eect preset, you can easily apply an eect that’s
appropriate for your situation.
MEMO
¹ To make detailed adjustments to a preset, edit the high-pass lter,
compressor, equalizer and noise gate settings on the channel
setup screen.
¹ You cannot overwrite the eect presets. Use the scene memories
to save the settings for presets you’ve edited (p. 65).
¹ When you load an eect preset, each preset setting is restored to
its default setting (factory settings).
1. Touch <EFFECT PRESET> on the channel setup screen.
2. Use the [VALUE] knob to select an eect preset, and press
the [VALUE] knob.
Value Explanation
DEFAULT For line input (default setting)
MEETING For meetings
INTERVIEW For interviews
AMBIENT MIC For capturing ambient sound
WINDY FIELD For capturing ambient sound in a windy area
A conrmation message appears.
* If you decide to cancel, press the [EXIT] button.
3. Use the [VALUE] knob to select “OK”, and then press the
[VALUE] knob.
The eect preset is loaded.
4. Congure the settings for each eect as necessary.
Touch the onscreen graphics to enlarge the settings for the eect. You
can also directly drag a point on the graph onscreen to edit.
ÁNoise gate
ÁCompressor
ÁEqualizer, High-pass lter
* For details on the parameter, refer to “2: AUDIO” (p. 99).