Roland VR-6HD

77
Other Functions
Editing a list
You can edit the contents of a function, change the order in which it is
executed, or copy/delete a function while creating a list or after you’ve
nished the list.
Editing the contents of a function
1. In step 1 of “Recording to the Sequencer” (p. 76), bring up
the operation list.
2. Touch the line to edit.
A popup menu appears.
3. Touch <EDIT FUNCTION>.
The edit screen for the operation to record to the sequencer appears.
4. Touch <FUNCTION> to select the operation to record.
5. Congure the related parameters.
Menu Value Explanation
FUNCTION
Sets the operation to record to the sequencer.
* The related menu is shown according to the operation you
set.
PGM TAKE
Switches the nal output
video.
MEMORY Recalls a scene memory.
MACRO
Executes a macro (a series of
recorded operations).
NAME —
Shows the name of the
operation.
TIME
Sets the operation when auto sequence is on.
Pause Pauses the auto sequence.
AUTO
Executes the next operation
in the sequence.
1–120sec
Executes the next operation
after delaying for a specied
amount of time.
Moving a function
1. In step 1 of “Recording to the Sequencer” (p. 76), bring up
the operation list.
2. Touch the line to move.
A popup menu appears.
3. Touch <MOVE>.
4. A green cursor is shown to indicate the move destination.
Use the [VALUE] knob to specify the move destination, and
press the [VALUE] knob.
This moves the line.
Copying a function
1. In step 1 of “Recording to the Sequencer” (p. 76), bring up
the operation list.
2. Touch the line to copy.
A popup menu appears.
3. Touch <DUPLICATE>.
The copied operation is added to the last line of the list.
Deleting a function
1. In step 1 of “Recording to the Sequencer” (p. 76), bring up
the operation list.
2. Touch the line to delete.
A popup menu appears.
3. Touch <DELETE>.
This deletes the operation line.