Ruijie RG-WLAN Series

Configuration Guide Configuring RLOG
Usage
rate causes log loss; too high rate raises CPU consumption.
 Enabling RLOG-combination export
Command
rlog set log-com
Parameter
Description
N/A
Configuration
Mode
AP configuration mode/AP group configuration mode
Configuration
Usage
With this function enabled, multiple logs are packed in one packet.
Check whether the RLOG server supports this function before configuration.
 Configuring the IP address of the RLOG device
Command
rlog dev-ip ip
Parameter
Description
ip: IP address of the RLOG device
Configuration
Mode
Global configuration mode
Configuration
Usage
(Optional) Specific types of logs require the IP address of RLOG device.
 Configuring the RLOG filtering
Command
rlog filter acl_id
Parameter
Description
id: Access list ID
Configuration
Mode
Global configuration mode
Configuration
Usage
This command is not supported at current.
Configuration Example
 Configuring the device IP address and the export rate
Configuration
Steps
Ruijie# configure terminal
Ruijie(config)# rlog dev-ip 10.10.10.1
Ruijie(config)# rlog export-rate 10000
Ruijie(config)# end