Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring CWMP
CPE
Ruijie#config
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#cwmp
Ruijie(config-cwmp)#cpe inform interval 60
Verification
Run the show command on the CPE to check whether the configuration commands have been
successfully applied.
CPE
Ruijie #show cwmp configuration
CWMP Status : enable
……
CPE inform interval : 60s
 Disabling the Function of Downloading Firmware and Configuration Files from the ACS
Network
Environment
See Figure 9-6.
Steps
 Enable the CWMP function and enter CWMP configuration mode.
 Disable the function of downloading firmware and configuration files from the ACS.
CPE
Ruijie#config
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#cwmp
Ruijie(config-cwmp)#disable download
Verification
Run the show command on the CPE to check whether the configuration commands have been
successfully applied.
CPE
Ruijie #show cwmp configuration
CWMP Status : enable
……
CPE download status : disable
 Disabling the Function of Uploading Configuration and Log Files to the ACS
Network
Environment
See Figure 9-6.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English