Ruijie RG-WLAN Series - Page 12

Configuration Guide Configuring STA Management
Mode
Usage Guide
N/A
Command
secondary-sta mac-address
Parameter
Description
mac-address: indicates the MAC address of the STA.
Defaults
No secondary STA is configured by default.
Command
Mode
Package configuration mode
Usage Guide
-
 Configuring an Association Control Zone
 (Mandatory) The configuration is performed on a fat AP.
 Configure an association control zone.
 APs can be added to an association control zone only after this association control zone is configured.
Command
control-zone czone-name
Parameter
Description
czone-name: Indicates the name of an association control zone. The name is a string of 1 to 64 characters.
Defaults
No association control zone is configured by default.
Command
Mode
Global configuration mode
Usage Guide
N/A
 Adding an AP to an Association Control Zone
 (Mandatory) The configuration is performed on a fat AP.
 Add an AP to an association control zone.
 Association control can be performed on only APs that are added to the association control zone.
Command
ap WORD
Parameter
Description
WORD: Indicates the name of an AP. The name is a string of 1 to 64 characters.
Defaults
No AP is added to an association control zone by default.
Command
Mode
Association control zone configuration mode
Usage Guide
N/A
 Enabling the Association Control Function
 (Mandatory) The configuration is performed on a fat AP.The assoc-control command must be used to enable the
association control function.