Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring FAT APs
rate-set 11b
Configures the 11b rate set.
rate-set 11g
Configures the 11g rate set.
rate-set 11n
Configures the 11n rate set.
rate-set 11ac
Configures the 11ac rate set.
mcast-rate
Configures the multicast rate.
power local
Configures the transmit power.
sta-limit
Configures the limit on the STA quantity
based on an RF interface.
11asupport
Configures whether to support 11a.
11bsupport
Configures whether to support 11b.
11gsupport
Configures whether to support 11g.
11nsupport
Configures whether to support 11n.
11acsupport
Configures whether to support 11ac.
response-rssi
Configures the minimum value of RSSI for
STA access.
assoc-rssi
Configures the minimum RSSI that keeps
STA access.
coverage-area-control
Configures the transmit power of
management frames.
sta-idle-timeout
Configures the STA idle time.
channel
Configures channels.
fragment-threshold
Configures the fragment threshold.
rts threshold
Configures the RTS threshold.
beacon period
Configures the beacon frame period.
short-preamble
Configures enabling/disabling of the short
preamble.
slottime
Configures enabling/disabling of the short
slot time.
chan-width
Configures the channel bandwidth.
short-gi
Configures enabling/disabling of short
prevention interval.
radio-type
Configures the radio type a/b.
country-code
Configures the country code.
antenna receive
Configures the receive mode of an antenna.
antenna transmit
Configures the transmit mode of an antenna.
external-antenna enable
Enables an external antenna and disables
an internal antenna.
peer-distance
Configures the allowable longest distance
between an AP and a wireless transmission
peer.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English