Ruijie RG-WLAN Series - Page 21

Configuration Guide Configuring Data Plan
4.4 Configuration
Configuration
Description and Command
Broadcast Forwarding
Weight Control
Optional configuration. Set the weights of packet types for broadcast forwarding.
data-plane queue-weight
Configures the weights of packet types for
broadcast forwarding on the AP.
Broadcast Wireless
Forwarding Control
Optional configuration. Enable the broadcast wireless forwarding function.
data-plane wireless-broadcast
Enables or disables the broadcast wireless
forwarding control function on the AP.
4.4.1 Configuring Broadcast Forwarding Weights
4.4.1.1 Networking Requirements
 You can control the weight of a packet type for forwarding according to actual network conditions, so as to avoid
network congestion for sudden traffic spike.
4.4.1.2 Notes
 N/A
4.4.1.3 Configuration Steps
Configuring Broadcast Forwarding Weights
 Optional configuration. Run the data-plane queue-weight command in global configuration mode to configure the
broadcast forwarding weights.