Ruijie RG-WLAN Series - Page 26

Configuration Guide Configuring WLAN Log
Feature
Description
Enabling the WLOG
Feature
You can enable the WLOG feature to automatically collect AP and STA information.
5.3.1 Enabling the WLOG Feature
After the WLOG feature is enabled, the AP automatically collects AP and STA information and records the information into
memory, enabling users, with provided information, to have a more accurate understanding of the wireless network and STA
status in the past 24 hours and analyze and troubleshoot problems.
Working Principle
After the WLOG feature is enabled, the AP automatically collects AP and STA information and records the information into
memory, and receives online/offline advertisement of the AP and STA and records into memory for users to view.
5.4 Configuration
Configuration
Description and Command
Enabling the WLOG Feature
(Mandatory) It is used to enable the WLOG feature.
wlan diag enable
Enables the WLOG feature
5.4.1 Enabling the WLOG Feature
Configuration Effect
 After the WLOG feature is enabled, the AP automatically records the AP and STA information.
Notes
 Enabling the WLOG feature pre-allocates memory. If the memory is not sufficient, the WLOG feature cannot be enabled.
Disabling the WLOG feature frees all memory for information storage and pre-allocated memory.
Configuration Steps
 Enabling the WLOG Feature
 (Mandatory) Run the wlog diag enable command to enable the WLOG feature.
 Enable the WLOG feature in global configuration mode of the AP device.
 After the WLOG feature is enabled, information is collected and recorded into memory on a regular basis.
Command
wlan diag enable
Parameter
Description
-
Defaults
By default, the WLOG feature is disabled.
Command
Global configuration mode