Ruijie RG-WLAN Series

Configuration Guide Configuring LLDP
Configuration
Description and Command
no { country | state | county | city | division
| neighborhood | street-group |
leading-street-dir | trailing-street-suffix |
street-suffix | number |
street-number-suffix | landmark |
additional-location-information | name |
postal-code | building | unit | floor | room |
type-of-place | postal-community-name |
post-office-box | additional-code } ca-word
Deletes civic address of a device.
Configuring the Emergency
Telephone Number
(Optional) It is used to configure the emergency telephone number of a device.
lldp location elin identifier id elin-location
tel-number
Configures the emergency telephone number
of a device.
no lldp location elin identifier id
Deletes the emergency telephone number of
a device.
5.4.1 Configuring the LLDP Function
Configuration Effect
 Enable or disable the LLDP function.
Notes
 To make the LLDP function take effect on an interface, you need to enable the LLDP function globally and on the
interface.
Configuration Steps
 Optional.
 Configure the LLDP function in global or interface configuration mode.
Verification
Display LLDP status
 Check whether the LLDP function is enabled in global configuration mode.
 Check whether the LLDP function is enabled in interface configuration mode.
Related Commands
 Enabling the LLDP Function
Command
lldp enable
Parameter
N/A