Configuration Guide Configuring LLDP
seconds: Indicates the initialization delay . The value ranges from 1 to 10 seconds.
Global configuration mode
Configure the initialization delay to prevent frequent initialization of the state machine caused by frequent
changes of the port work mode.
 Restoring the Default Initialization Delay
no lldp timer reinit-delay
Global configuration mode
Configure the initialization delay to prevent frequent initialization of the state machine caused by frequent
changes of the port work mode.
Configuration Example
 Configuring the Initialization Delay
Set the initialization delay to 3 seconds.
Ruijie(config)#lldp timer reinit-delay 3
Display the global LLDP status information.
Ruijie(config)#show lldp status
Global status of LLDP : Enable
Neighbor information last changed time :
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 3s
Transmit delay : 2s
Notification interval : 5s
Fast start counts : 3
To Next Page
Loading...
Need help?
General
