Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring LLDP
 Configuring the LLDP Trap Transmission Interval
Command
lldp timer notification-interval seconds
Parameter
Description
seconds: Indicates the interval for transmitting LLDP Trap messages. The value ranges from 5 to 3,600
seconds. The default value is 5 seconds.
Command
Mode
Global configuration mode
Usage Guide
Configure the LLDP Trap transmission interval to prevent frequent transmission of LLDP Trap messages.
LLDP changes detected within this interval will be transmitted to the NMS server.
 Restoring the LLDP Trap Transmission Interval
Command
no lldp timer notification-interval
Parameter
Description
N/A
Command
Mode
Global configuration mode
Usage Guide
Configure the LLDP Trap transmission interval to prevent frequent transmission of LLDP Trap messages.
LLDP changes detected within this interval will be transmitted to the NMS server.
Configuration Example
 Enabling the LLDP Trap Function and Configuring the LLDP Trap Transmission Interval
Configuration
Steps
Enable the LLDP Trap function and set the LLDP Trap transmission interval to 10 seconds.
Ruijie(config)#lldp timer notification-interval 10
Ruijie(config)#interface gigabitethernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#lldp notification remote-change enable
Verification
Display LLDP status information.
Ruijie(config-if-GigabitEthernet 0/1)#show lldp status
Global status of LLDP : Enable
Neighbor information last changed time :
Transmit interval : 30s
Hold multiplier : 4
Reinit delay : 2s
Transmit delay : 2s
Notification interval : 10s

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English