Ruijie RG-WLAN Series - Page 332

Configuration Guide Configuring PPPoE Client
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Associate the logical interface with a specific dialer pool.
Configuring the Encapsulation Protocol
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Configure the encapsulation protocol PPP on the logical interface.
Configuring the MTU of the Logical Interface
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Set the MTU of the logical interface to 1488.
Associating a Dialer Triggering Rule
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Associate a dialer triggering rule.
Configuring the User Name for CHAP Authentication
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Configure the user name for CHAP authentication.
Configuring the Password for CHAP Authentication
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Configure the password for CHAP authentication.
Configuring the User Name and Password for PAP Authentication
 The configuration is mandatory.
 Perform this configuration in logical interface configuration mode.
 Configure the user name and password for PAP authentication.