Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring DHCPConfiguring DHCP
 Configuring Network Number and Subnet Mask of DHCP Address Pool
 Mandatory. It defines a range of dynamically assigned addresses.
 Run the network command in DHCP address pool configuration mode.
 Configuring Default Gateway of Client
 Optional. It is used to configure a gateway address.
 Run the default-router command in DHCP address pool configuration mode.
 Configuring Address Lease
 Optional. It is used to configure an IP address lease, which is 24h by default.
 Run the lease command in DHCP address pool configuration mode.
 Configuring TFTP Server Address
 Optional. It is used to configure a TFTP server address.
 Run the next-server command in DHCP address pool configuration mode.
 Configuring Domain Name of Client
 Optional. It is used to configure the domain name of a client.
 Run the domain-name command in DHCP address pool configuration mode.
 Configuring DNS
 Optional. It is used to configure a DNS address.
 Run the dns command in DHCP address pool configuration mode.
 Configuring NetBIOS WINS Server
 Optional. It is used to configure a NetBIOS WINS server address.
 Run the netbios-name-server command in DHCP address pool configuration mode.
 Configuring NetBIOS Node Type on Client
 Optional. It is used to configure a NetBIOS node type.
 Run the netbios-name-type command in DHCP address pool configuration mode.
 Configuring Alarm Threshold of Address Pool
 Optional. It is used to manage the number of leases. When a threshold (90% by default) is reached, an alarm will be
printed.
 Run the lease-threshold command in DHCP address pool configuration mode.
 Configuring User-Defined Option
 Optional. It is used to configure user-defined options.
 Run the option command in DHCP address pool configuration mode.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English