Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring DHCPConfiguring DHCP
Configuration
Description and Command
Configuring DHCP Relay Option 82
(Optional) It is used to assign IP addresses of different privileges to clients
in combination with the information of a physical port.
ip dhcp relay information
option82
Enables DHCP option82.
Configuring DHCP Relay Check
Server-ID
(Optional) It is used to enable a DHCP Relay agent to send DHCP request
packets only to a specified server.
ip dhcp relay check server-id
Enables a DHCP Relay agent to send
DHCP request packets only to a specified
server
Configuring DHCP Relay Suppression
(Optional) It is used to shield DHCP request packets on an interface.
ip dhcp relay suppression
Enables DHCP Relay Suppression.
 Configuring DHCP Client
Configuration
Description and Command
Configuring DHCP Client
(Mandatory) It is used to enable DHCP Client.
ip address dhcp
Enables an Ethernet interface, a
PPP/HDLC-encapsulated or
FR-encapsulated interface to obtain IP
addresses through DHCP.
4.4.1 Configuring Dynamic IP Address
Configuration Effect
Provide all DHCP clients with DHCP service including assigning IP addresses and gateways.
Notes
A DHCP server and a DHCP relay share the service dhcp command, but a device cannot function as a DHCP server and
relay at the same time. When a device is configured with a valid address pool, it acts as a server and forwards packets.
Otherwise, it serves as a relay agent.
Configuration Steps
 Enabling DHCP Server
 Mandatory. It achieves dynamic IP address assignment.
 Run the service dhcp command in global configuration mode.
 Configuring Address Pool
 Mandatory. It is used to create an IP address pool.
 Run the ip dhcp pool command in global configuration mode.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English