Configuration Guide Configuring Network Communication Test Tools
Ruijie# traceroute ipv6 3004::1
< press Ctrl+C to break >
Tracing the route to 3004::1
1 3000::1 0 msec 0 msec 0 msec
2 3001::1 4 msec 4 msec 4 msec
3 3002::1 8 msec 8 msec 4 msec
4 3004::1 4 msec 28 msec 12 msec
The preceding test result indicates that the network device accesses host 3004::1 by transmitting packets
through gateways 1-4. In addition, the time required to reach each gateway is displayed.
 Executing the Traceroute IPv6 Function on a Faulty Network
In Privileged EXEC mode, run the traceroute ipv6 3004::1 command.
Ruijie# traceroute ipv6 3004::1
< press Ctrl+C to break >
Tracing the route to 3004::1
1 3000::1 0 msec 0 msec 0 msec
2 3001::1 4 msec 4 msec 4 msec
3 3002::1 8 msec 8 msec 4 msec
4 * * *
5 3004::1 4 msec 28 msec 12 msec
The preceding test result indicates that the network device accesses host 3004::1 by transmitting packets
through gateways 1–5, and Gateway 4 is faulty.
To Next Page
Loading...
Need help?
General
