Configuration Guide Configuring Web Authentication
Configuring PC Authentication Exemption
(Optional)Authentication exemption allows the STAs that are identified as PC or Other to access the Internet without
performing WeChat-based Wi-Fi connection authentication.
Webauth template configuration mode
Enabling the Smart WeChat Web Authentication
Optional.
web-auth sta-perception enable
Global configuration mode
Enable the smart authentication based on customer’s requirements. Run the ip dhcp snooping command
before the smart authentication takes effect.
Enabling the Single Escape Function
(Optional)After the escape function is enabled, if an STA does not initiate a login authorization request after the
specified time has elapsed, the server is considered to be faulty and the STA is permitted to escape the authentication
and access the Internet.
escape interval seconds online-time minutes
seconds: Indicates the escape interval in the unit of seconds. The recommended value is 5s.
minutes: Indicates the maximum online time for escape users in the unit of minutes. When it is set to 0, the
user can access the Internet without time limit.
Webauth template configuration mode
Enabling the Collective Escape Function
(Optional) After the function is enabled, the device starts counting single escape users. If the number of single escape
users reaches the threshold within a certain interval, the device starts collective escape and all users who gain access
later are permitted to pass without authentication.