Configuration Guide Configuring Web Authentication
A pop-up mode must be configured. By default, advertisements are pushed only to successfully authenticated clients.
You can modify the push mode based on section 1.4.13 "Specifying the Advertisement Mode."
Only one advertisement URL can be configured.
Configuration Steps
(Optional) By default, no advertisement URL is configured, indicating that advertisements are not pushed. If an
advertisement URL is configured, advertisements are displayed to users after authentication by default.
Verification
Configure Ruijie iPortal Web Authentication.
Configure the advertisement URL.
Check whether the browser displays the specified advertisement URL after authentication.
Related Commands
Configuring an Advertisement URL
url: Indicates an advertisement URL.
Webauth template configuration mode
You can configure different pop-up modes to achieve different push effects.
Configuration Example
Configuring an Advertisement URL
Configure the advertisement URL.
Ruijie(config.tmplt.iportal)#popuphttp://www.ruijie.com.cn/
Check whether the configuration is successful.
Ruijie#show web-auth template
Webauth Template Settings:
------------------------------------------------------------
Name: iportal
Page-suit: default
popup url: http://www.ruijie.com.cn/