Ruijie RG-WLAN Series User Manual

Configuration Guide Configuring IGMP Snooping
Steps
 Enable Immediate-leave function.
 Disable router port learning.
 Configure the aging time of a router port.
 Configuring the aging time of a member port.
 Configure the response time of a Query packet.
Ruijie# configure terminal
Ruijie(config)# ip igmp snooping fast-leave enable
Ruijie(config)# no ip igmp snooping mrouter learn pim-dvmrp
Ruijie(config)#ip igmp snooping dyn-mr-aging-time 200
Ruijie(config)#ip igmp snooping host-aging-time 100
Ruijie(config)#ip igmp snooping query-max-response-time 60
Ruijie(config)# end
Verification
Run the show ip igmp snooping command to check whether the configuration is successful.
Ruijie#show ip igmp snooping
IGMP Snooping running mode: IVGL
IGMP Snooping L2-entry-limit: 65536
Source port check: Disable
Source ip check: Disable
IGMP Fast-Leave: Enable
IGMP Report suppress: Enable
IGMP Globle Querier: Disable
IGMP Preview: Disable
IGMP Tunnel: Disable
Query Max Response Time: 60(Seconds)
IGMP Preview group aging time : 60(Seconds)
Dynamic Mroute Aging Time : 200(Seconds)
Dynamic Host Aging Time : 100(Seconds)
Common Errors
 Basic IGMP snooping functions are not configured or the configuration is not successful.
10.4.3 Configuring an IGMP Querier
Configuration Effect
 Configure the device as an IGMP querier, which will send IGMP Query packets periodically and collect user demanding
information.
Notes
 Basic IGMP snooping functions must be configured.

Ruijie RG-WLAN Series Specifications

General

Brand	Ruijie
Model	RG-WLAN Series
Category	Wireless Access Point
Language	English