EasyManuals Logo

Ruijie RG-WLAN Series User Manual

Ruijie RG-WLAN Series
1243 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #951 background imageLoading...
Page #951 background image
Configuration Guide Configuring SCC
12.4 Configuration
Configuration Item
Suggestions and Related Commands
Configuring User
Online-Status Detection
Optional configuration, which is used to specify whether to enable the user
online-status detection function.
offline-detect interval threshold
Configures the parameters of the user
online-status detection function.
no offline-detect
Disables the user online-status detection
function.
default offline-detect
Restores the default user online-status
detection mode.
12.4.1 Configuring User Online-Status Detection
Configuration Effect
After the user online-status detection function is enabled, if a user's traffic is lower than a certain threshold within the
specified period of time, the device automatically disconnects the user, so as to avoid the economical loss incurred by
constant charging to the user.
Precautions
It should be noted that if disconnecting zero-traffic users is configured, generally software such as 360 Security Guard will
run on a user terminal by default. Then such software will send packets time and again, and the device will disconnect the
user only when the user's terminal is powered off.
Configuration Method
Configuring User Online-Status Detection
Optional configuration. A user is disconnected if the user does not involve any traffic within eight hours by default.
If the traffic threshold parameter threshold is set to 0, it indicates that zero-traffic detection will be performed.
Command
offline-detect interval interval threshold threshold
no offline-detect
default offline-detect
Parameter
Description
interval: This parameter indicates the offline-detection interval. The value range is from 6 to 65535 in
minutes on a switch or from 1 to 65535 in minutes on a non-switch device. The default value is 8 hours, that
is, 480 minutes.
threshold: This parameter indicates the traffic threshold. The value range is from 0 to 4294967294 in bytes.
The default value is 0, indicating that the user is disconnected when no traffic of the user is detected.
no offline-detect: Disables the user online-status detection function.

Table of Contents

Other manuals for Ruijie RG-WLAN Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ruijie RG-WLAN Series and is the answer not in the manual?

Ruijie RG-WLAN Series Specifications

General IconGeneral
BrandRuijie
ModelRG-WLAN Series
CategoryWireless Access Point
LanguageEnglish

Related product manuals