36 Operating Instructions Cubis
®
MCA
Operating Design
Level 1 Level 2 Level 3 Description
Connections Certificates Trusted certification
authorities
Display and export the trusted certification
authorities (CA).
Device certificates Display and export the device certificates.
Trust unknown
certification authorities
Specifies the security for unknown
certification authorities.
Interfaces Serial communication
over network
Display and edit the profile for the Ethernet
connection.
COM-RS232 interface Display and edit the profile for the RS232
connection.
USB-B interface Display and edit the profile for the USB-B
connection.
SBI protocol Format Configure the settings for the data output
and data output format.
Output Define whether the output takes place with
or without stability.
Automatic output Activate or deactivate the output rate for
automatic data output.
Display SBI error
messages
Activates or deactivates the error messages
forthe SBI protocol.
Formatting output values Defines the line length for the data output.
Climate modules List of connected climate
modules
Define the settings for the connected
climate module.
Connected devices Motion sensor Define the number and functions of
thegestures.
Only available if a motion sensor is
connected to the device.
External USB keys Triggers key functions for the device via
anexternally connected peripheral device,
e.g. a keyboard or a foot switch.
Device
settings
Date and time NTP configuration Activate or deactivate time synchronization
via NTP.
Set the date and time Enter a date and time. Determine the
timezone.
Safe weighing isoCAL execution mode Set the isoCAL function.
Safety level Set the alert level for the message
indicating that the isoCAL function must
beexecuted.