19
Quick CAL with
You can activate the "internal calibration" function anytime by a touch of the
key (factory setting).
That’s why we call it "Quick CAL" for short.
You can also set a different menu code to change the function of the
key from "internal calibration" to "calibration test."
Both functions are accessible even if you select code 1 10 2 or 1 11 2, respectively.
Function of the
key Code
Access denied 2 2 1
Internal calibration * 2 2 5
Calibration test 2 2 6
* = Factory setting
To Next Page
Loading...
