SatLab SLT12 - Prism Constant; Reticle Backlight; Function Key

SLT12 User Manual
183
Figure 15- 3
Figure 15- 4
15.3
Prism Constant
The prism constant of the prism can be set. The setting here has the same effect as the setting in [EDM Setting].
15.4
Reticle Backlight
Set the illumination level of the scoreboard for illumination during nighttime measurements.
15.5
Function Key
Used to set the shortcut jump parameters of the physical keys of the total station, the specific settable parameters
are shown below.