SLT12 User Manual
113
3. Click "..."-[Settings] in the upper right corner to set the loading order and the number of loading.
4. Click a point library data, you can choose to "edit" or "delete" the data. If there is a point record of the
measurement points, you can also view the point record.
Figure 10- 7
5. Enter a full or partial name in the name input box, and click "Search" to search for a point.
Figure 10- 8
10.2.1 All Points
When the point library is switched to select all points, the interface displays the NEZ and Ground code
information of all points (measurement points, stakeout points, control points).
To Next Page
Loading...
