SLT12 User Manual
115
Figure 10- 11
10.2.2 Measurement Points
When the point bank selects measurement points, the information of all measurement points (including
measurement points, Backsight points, angle measurement points, distance measurement points and coordinate
measurement points) is displayed.
Figure 10- 12
Click on the hover button at the bottom right corner - "Export" to export the measurement points. Select the
desired export format, enter the file name, and click "OK" to export the measurement points to the total station
memory. Currently, the supported export formats are *. htf, *.txt, *.csv, *. dat, *. GSI, *. dxf and *. gt7.
To Next Page
Loading...
