SatLab SLT12 - Point S.O (Coordinate Stakeout)

SLT12 User Manual
35
Figure 5- 6
5.2
Point S.O (Coordinate Stakeout)
Access through [Measurement] - [Point S.0] or [Stake out] - [Point S.0].
Figure 5- 7
[Last] / [Next]: Switch to select the stakeout point in the stakeout point library.
[Select Stake Point]: Enter the stakeout point setting interface.
You can select the stakeout point by manual input, point name search, and list point selection.