SLT12 User Manual
19
Figure 3- 9
3.8
Notice for using U disk
This machine supports a maximum of USB2.0/2.1/3.0/3.1 128G USB flash drive reading and writing, when
running the program, don’t insert or pull out the U disk. If you do so when the instrument is in use, the action
may cause an error!
3.9
Instrument Registration
No distance measurement operation can be performed before the instrument has been registered.
Figure 3- 10
1) For instrument registration, you can click [Info.] in the main interface configuration options or click [Register
TS] in the main interface shortcut menu to enter the instrument registration interface.
To Next Page
Loading...
