Appendix A: Command Code Quick Reference
SATO Programming Reference Page A-5
FXaaabccc
dddeee
Data Matrix. Sequential Numbering. Prints sequential numbered Data
Matrix 2-D symbols.
5-6
aaa = Number of duplicate labels (001-999)
b = Increment or decrement
+ Increment
- Decrement
ccc = Increment/decrement steps (001-999)
ddd = Sequential numbering start position (001-999).
Referenced to left side.
eee = Incremented data length (001-999). Measured from
start position.
Gabbbccc(data) Custom Graphics. Allows the creation and printing of graphic images
using a dot-addressable matrix.
2-36
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal 8 x 8 blocks (see page 5-XX for
range)
ccc = Number of vertical 8 x 8 blocks (see page 5-XX for
range)
data = Data to describe the graphic image
GMaaaaa BMP File. Downloads BMP file to the internal graphics image memory. 2-38
aaaaa = No. of bytes to be downloaded (max DOS file size is
32K
GPaaaaa PCX File. Downloads PCX file to the internal graphics image memory. 2-39
aaaaa = No. of bytes to be downloaded (max DOS file size is
32K)
Haaaa Horizontal Position. Specifies a fieldís horizontal location across the
width of the label from the current base reference point. The units of
measurement are dots.
2-53
IDaa Job ID Store. Stores the Job ID number. 2-40
aa = Job ID number assigned (01-99)
J Journal Print. Provides the ability to print text line by line. Fixed
spacing between lines and characters.
2-42
Kab90cc Recall Custom Designed Characters. Recalls for printing a custom
character stored by the Tabcc(data) command.
2-13
a = 1 16 x 16 matrix
2 24 x 24 matrix
Instruction Description Page
To Next Page
Loading...
