Appendix A: Command Code Quick Reference
SATO Programming Reference Page A-15
3 Cut, backfeed before print
4 Cut, no backfeed
7 Dispense, backfeed after print
8 Dispense, backfeed before print
POabcc Pitch Offset. Sets the pitch type, direction and offset to be used 6-7
a= 0 Cutter
1 Dispense
2Tear-Off
3 Continuous
b = + Positive offset
- Negative offset
cc = 00 to 99, offset value in dots.
TPa Test Print. Allows test labels to be printed via host command. 6-16
a = 0 Small user test print.
1 Large user test print.
2 Small factory test print.
3 Large factory test print.
Instruction Description Page
To Next Page
Loading...
