4 Operation and Configuration
103
S84-ex/S86-ex Operator Manual
PORT NUMBER
Set the LAN port numbers, 1 to 3.
The setting range is from 00001 to 65535.
The setting details are as follows:
Note
• Shows only if LAN interface is selected.
• Each port (1, 2 and 3) must be set to different values.
• Set a value other than 20, 21, 22, 53, 80, 123, 161, 443, 465, 515, 546,
547, 587, 8080, 8883, or 19541. These values duplicate other port
numbers, so that correct communications would be impossible.
• When changing the port number, it is recommended to set to 1024 and
above.
• The setting will be effective after you power on the product again.
WIRELESS MODE
Set the communication method of the wireless LAN.
The options are as follows:
•Ad Hoc
• Infrastructure
Note
• Shows only if wireless LAN interface is selected.
• The setting will be effective after you power on the product again.
SSID
Set the SSID of the wireless LAN.
You can enter a maximum of thirty-two characters including alphabet
(upper case and lower case), numbers and symbols.
Note
• Shows only if wireless LAN interface is selected.
• The setting will be effective after you power on the product again.
Port Number Initial
Value
Description
Status3, Status5 Status4
1 1024 Bi-Directional Port Input port
2 1025 Not applicable Output port
3 9100 Bi-Directional Port Bi-Directional Port
To Next Page
Loading...
