SATO S84 ex - Page 106

4 Operation and Configuration
104
S84-ex/S86-ex Operator Manual
CHANNEL
Set the communication channel of the wireless LAN.
The setting range is from 01 to 13 and the default value is 06.
Note
• Shows only if wireless LAN interface is selected.
• The setting will be effective after you power on the product again.
• When the channel has become invalid due to a region code change, the
channel returns to its default setting.
PROTOCOL
Set the communication protocol.
• STATUS3: When selected, the product will proceed to the IGNORE
CR/LF screen.
• STATUS4: When selected, the product will proceed to the STATUS
REPLY TIMING screen.
• STATUS5: When selected, the product will proceed to the ITEM NO.
CHECK screen.
ITEM NO. CHECK
Set the item number check function.
• ENABLE: Enable the item number check function.
• DISABLE: Disable the item number check function.
Note
Shows only if PROTOCOL is set to STATUS5.
BCC CHECK
Set the BCC check function.
• ENABLE: Enable the BCC check function.
• DISABLE: Disable the BCC check function.
Note
Shows only if PROTOCOL is set to STATUS5.