SATO S84 ex - Page 131

4 Operation and Configuration
129
S84-ex/S86-ex Operator Manual
SENSOR LEVEL
Set the sensor adjustment method.
• AUTO: Automatically adjust the sensor level.
• MANUAL: Manually adjust the sensor level.
SENSOR SELECT
Select the media sensor type for the sensor adjustment.
• I-MARK: Adjust the I-mark sensor.
• GAP: Adjust the Gap sensor.
Note
Shows only if AUTO is selected for the sensor adjustment method.
I-mark sensor adjustment explanation screen
This screen shows the instruction to place the media for I-mark sensor
adjustment.
Shows only if I-MARK is selected in the SENSOR SELECT screen.
After placing the media, press the ENTER button to start the automatic
sensor adjustment.
Gap sensor adjustment explanation screen
This screen shows the instruction to place the media for I-mark sensor
adjustment.
Shows only if GAP is selected in the SENSOR SELECT screen.
After placing the media, press the ENTER button to start the automatic
sensor adjustment.